ENGLISHKS-X621-6 cutter with cutter moving type Alu-profile End Milling Machine
The machine is designed and developed by adopting mature German structural design. It is mainly used for the milling of mortises and surfaces of aluminum alloy door and window material and curtain wall material. Carbide milling tool can be used to mill precise mortises once on the surface of sectional material.
1. Unique high-precision guide-way and multi-point support of specialized guide-way with good rigidity can ensure the precision and stability of machine tool.
2. Pneumatic feed is adopted by the machine tool, the operation is stable with step-less regulating.
3. It equips with four horizontal blades on 3 motors, cutting blades and rotary milling blades are assembled on different spindles, it can end mill different profile and different requirements by adjusting the spindles of motors.
4. There are specialized handles or hand wheels on four milling tools and vertical cutting-off tools to adjust fore and after or up and down. And there is digital monitor with convenient and direct adjustment. The precision of milling mortises is not more than 0.15 mm.
5. The workbench can be placed 8 to 12 profiles once with high production efficiency.
The new Alu-profile End Milling Machine(6 cutter with cutter moving type) KS-X621 mills accurate tenon mouth on side surface of profiles by hard alloy milling blades.Germany Siemens Motor,Imported High precision bearing,high precision linear guide and special rail seat with multi-point support,which ensures its precision,stability and rigidity;it also adopts stepless speed automatic feed,and the six blades works simultaneously,very convinent and high efficient.
TECHNICAL PARAMETER
|
Model and parameter |
6 cutter with cutter moving type Alu-profile End Milling Machine KS-X621 |
|
Milling travel |
1500mm |
|
Tool feeding/ material pressing mode |
Stepless speed automatic feed, automatic material pressing |
|
Worktable size(length X width) |
480X500mm |
|
Power of cutting motor |
3kW X 6 |
|
Specification of milling cutter |
Ф250×Ф50×6.5X5 |
|
Specification of saw blade or rotation blade |
Ф350×Ф30×3.2 ×120T ×1 |
|
Rotating speed of motor |
2840RPM |
|
Working air pressure |
0.6-0.8MPa |
|
Working voltage |
380V 50Hz |
|
Dimension (L*W*H) |
3450X1300X1850mm |
|
Machine Weight |
2000kg |
|
Optional function and device |
Customization of tool, spare tool and fixture of profile |
Pre:
KS-X411--5 cutter Alu-profile End Milling Machine
Next:
KS-X114--Multi-function Curtain Wall Ending Milling Machine
